|
|||||||||||
 |
|||||||||||
|
|
Backup and recovery management: know your data and your storageFrom Wikipedia, the free encyclopedia Jump to: navigation, search For other uses of "Backup", see Backup (disambiguation). In information technology, backup refers to making copies of data so that these additional copies may be used to restore the original after a data loss event. These additional copies are typically called "backups." Backups are useful primarily for two purposes: 1) to restore a computer to an operational state following a disaster (called disaster recovery) and 2) to restore small numbers of files after they have been accidentally deleted or corrupted.[1] Due to a considerable overlap in technology, backups and backup systems are frequently confused with archives and fault-tolerant systems. Backups differ from archives in the sense that archives are the primary copy of data and backups are a secondary copy of data. Backup systems differ from fault-tolerant systems in the sense that backup systems assume that a fault will cause a data loss event and fault-tolerant systems assume a fault will not. Backups are typically that last line of defense against data loss, and consequently the least granular and the least convenient to use.[2] Since a backup system contains at least one copy of all data worth saving, the data storage requirements are considerable. Organizing this storage space and managing the backup process is a complicated undertaking. Contents [hide] 1 Storage, the base of a backup system 1.1 Data repository models 1.2 Storage media 1.3 Managing the data repository 2 Selection, access, and manipulation of data 2.1 Approaches to backing up files 2.2 Approaches to backing up live data 2.3 Backing up non-file data 2.4 Manipulating the backed up data 3 Managing the backup process 3.1 Objectives 3.2 Limitations 3.3 Implementation 3.4 Measuring the process 4 Lore 4.1 Advice 4.2 Events 5 Glossary of backup terms 6 See also 7 References [edit] Storage, the base of a backup system [edit] Data repository models Any backup strategy starts with a concept of a data repository. The backup data needs to be stored somehow and probably should be organized to a degree. It can be as simple as a sheet of paper with a list of all backup tapes and the dates they were written or a more sophisticated setup with a computerized index, catalog, or relational database. Different repository models have different advantages. This is closely related to choosing a backup rotation scheme. Unstructured An unstructured repository may simply be a stack of floppy disks or CD-R media with minimal information about what was backed up and when. This is the easiest to implement, but probably the least likely to achieve a high level of recoverability. Full + Incrementals A Full + Incremental repository aims to make storing several copies of the source data more feasible. At first, a full backup (of all files) is taken. After that an incremental backup (of only the files that have changed since the previous full or incremental backup) can be taken. Restoring whole systems to a certain point in time would require locating the full backup taken previous to that time and all the incremental backups taken between that full backup and the particular point in time to which the system is supposed to be restored. This model offers a high level of security that something can be restored and can be used with removable media such as tapes and optical disks. The downside is dealing with a long series of incrementals and the high storage requirements.[3] Full + Differential A full + differential backup differs from a full + incremental in that after the full backup is taken, each partial backup captures all files created or changed since the full backup, even though some may have been included in a previous partial backup. Its advantage is that a restore involves recovering only the last full backup and then overlaying it with the last differential backup.[4] Mirror + Reverse Incrementals A Mirror + Reverse Incrementals repository is similar to a Full + Incrementals repository. The difference is instead of an aging full backup followed by a series of incrementals, this model offers a mirror that reflects the system state as of the last backup and a history of reverse incrementals. One benefit of this is it only requires an initial full backup. Each incremental backup is immediately applied to the mirror and the files they replace are moved to a reverse incremental. This model is not suited to use removable media since every backup must be done in comparison to the mirror. Continuous data protection This model takes it a step further and instead of scheduling periodic backups, the system immediately logs every change on the host system. This is generally done by saving byte or block-level differences rather than file-level differences.[5] It differs from simple disk mirroring in that it enables a roll-back of the log and thus restore of old image of data. [edit] Storage media Regardless of the repository model that is used, the data has to be stored on some data storage medium somewhere. Magnetic tape Magnetic tape has long been the most commonly used medium for bulk data storage, backup, archiving, and interchange. Tape has typically had an order of magnitude better capacity/price ratio when compared to hard disk, but recently the ratios for tape and hard disk have become a lot closer.[6] There are myriad formats, many of which are proprietary or specific to certain markets like mainframes or a particular brand of personal computer. Tape is a sequential access medium, so even though access times may be poor, the rate of continuously writing or reading data can actually be very fast. Some new tape drives are even faster than modern hard disks. Hard disk The capacity/price ratio of hard disk has been rapidly improving for many years. This is making it more competitive with magnetic tape as a bulk storage medium. The main advantages of hard disk storage are low access times, availability, capacity and ease of use.[7] Optical disc A recordable CD can be used as a backup device. One advantage of CDs is that they can hold 650 MiB of data on a 12 cm (4.75") reflective optical disc. They can also be restored on any machine with a CD-ROM drive. Another common format is recordable DVD. Many optical disk formats are WORM type, which makes them useful for archival purposes since the data can't be changed. Other rewritable formats can also be utilized such as CDRW or DVD-RAM Floppy disk During the 1980s and early 1990s, many personal/home computer users associated backup mostly with copying floppy disks. The low data capacity of a floppy disk makes it an unpopular and obsolete choice in 2007.[8] Solid state storage Also known as flash memory, thumb drives, USB keys, compact flash, smart media, memory stick, Secure Digital cards, etc., these devices are relatively costly for their low capacity, but offer excellent portability and ease-of-use. Remote backup service As broadband internet access becomes more widespread, remote backup services are gaining in popularity. Backing up via the internet to a remote location can protect against some worse case scenarios, such as fire, flood or earthquake, destroying any backups along with everything else. A drawback to a remote backup service is that an internet connection is usually substantially slower than the speed of local data storage devices, so this can be a problem for people with large amounts of data. It also has the risk associated with putting control of personal or sensitive data in the hands of a third party. [edit] Managing the data repository Regardless of the data repository model or data storage media used for backups, a balance needs to be struck between accessibility, security and cost. On-line On-line backup storage is typically the most accessible type of data storage, which can begin restore in miliseconds time. A good example would be an internal hard disk or a disk array (maybe connected to SAN). This type of storage is very convenient and speedy, but is relatively expensive. On-line storage is vulnerable to being deleted or overwritten, either by accident, or in the wake of a data-deleting virus payload. Near-line Near-line storage is typically less accessible and less expensive than on-line storage, but still useful for backup data storage. A good example would be a tape library with restore times ranging from seconds to a few minutes. A mechanical device is usually involved in moving media units from storage into a drive where the data can be read or written. Off-line Off-line storage is similar to near-line, except it requires human interaction to make storage media available. This can be as simple as storing backup tapes in a file cabinet. Media access time is more than an hour. Off-site vault To protect against a disaster or other site-specific problem, many people choose to send backup media to an off-site vault. The vault can be as simple as the System Administrator’s home office or as sophisticated as a disaster hardened, temperature controlled, high security bunker that has facilities for backup media storage. Backup site, Disaster Recovery Center or DR Center In the event of a disaster, the data on backup media will not be sufficient to recover. Computer systems onto which the data can be restored and properly configured networks are necessary too. Some organizations have their own data recovery centers that are equipped for this scenario. Other organizations contract this out to a third-party recovery center. Note that because DR site is itself a huge investment, backup is very rarely considered preferred method of moving data to DR site. More typical way would be remote disk mirroring, which keeps the DR data as up-to-date as possible. [edit] Selection, access, and manipulation of data [edit] Approaches to backing up files Deciding what to back up at any given time is a harder process than it seems. By backing up too much redundant data, the data repository will fill up too quickly. If we don't back up enough data, critical information can get lost. The key concept is to only back up files that have changed. Copying files Copy the files to be backed up to another location using the OS specific copy utility. Filesystem dump Copy the filesystem that holds the files in question to another location. This usually involves unmounting the filesystem and running a program like dump. This is also known as a raw partition backup. This type of backup has the possibility of running faster than a backup that simply copies files. A feature of some dump software is the ability to restore specific files from the dump image. Identification of changes Some filesystems have an archive bit for each file that says it was recently changed. Some backup software looks at the date of the file and compares it with the last backup, to determine whether the file was changed. Block Level Incremental A more sophisticated method of backing up changes to files is to only back up the blocks within the file that changed. This requires a higher level of integration between the filesystem and the backup software. Versioning file system A versioning filesystem keeps track of all changes to a file and makes those changes accessible to the user. Generally this gives access to any previous version, all the way back to the file's creation time. An example of this is Wayback for the Linux OS [9] [edit] Approaches to backing up live data If a computer system is in use while it is being backed up, the possibility of files being open for reading or writing is real. If a file is open, the contents on disk may not correctly represent what the owner of the file intends. This is especially true for database files of all kinds. When attempting to understand the logistics of backing up open files, one must consider that the backup process could take several minutes to back up a large file such as a database. In order to back up a file that is in use, it is vital that the entire backup represent a single-moment snapshot of the file, rather than a simple copy of a read-through. This represents a challenge when backing up a file that is constantly changing. Either the database file must be locked to prevent changes, or a method must be implemented to ensure that the original snapshot is preserved long enough to be copied, all while changes are being preserved. Backing up a file while it is being changed, in a manner that causes the first part of the backup to represent data before changes occur to be combined with later parts of the backup after the change results in a corrupted file that is unusable, as most large files contain internal references between their various parts that must remain consistent throughout the file. Snapshot backup A snapshot is an instantaneous function of some storage systems that presents a copy of the filesystem as if it was frozen in a specific point in time, often by a copy-on-write mechanism. An effective way to backup live data is to temporarily quiesce it (e.g. close all files), take a snapshot, and then resume live operations. At this point the snapshot can be backed up through normal methods. [10] While a snapshot is very handy for viewing a filesystem at a different point in time, it is hardly an effective backup mechanism by itself. Open file backup - file locking Many backup software packages feature the ability to backup open files. Some simply check for openness and try again later. Cold database backup During a cold backup the database is closed or locked and not available to users. All files of the database are copied (image copy). The datafiles do not change during the copy so the database is in sync upon restore. [11] Hot database backup Some database management systems offer a means to generate a backup image of the database while it is online and usable ("hot"). This usually includes an inconsistent image of the data files plus a log of changes made while the procedure is running. Upon a restore, the changes in the log files are reapplied to bring the database in sync. [12] [edit] Backing up non-file data Not all information stored on the computer is stored in files. Accurately recovering a complete system from scratch requires keeping track of this non-file data too. System description System specifications are needed to procure an exact replacement after a disaster. File metadata Each file's permissions, owner, group, ACLs, and any other metadata need to be backed up for a restore to properly recreate the original environment. Partition layout The layout of the original disk, as well as partition tables and filesystem settings, is needed to properly recreate the original system. Boot sector The boot sector can sometimes be recreated more easily than saving it. Still, it usually isn't a normal file and the system won't boot without it. [edit] Manipulating the backed up data It is frequently useful to manipulate the backed up data to optimize the backup process. These manipulations can improve backup speed, restore speed, data security, and media usage. Compression Various schemes can be employed to shrink the size of the source data to be stored so that uses less storage space. Compression is frequently a built-in feature of tape drive hardware. De-duplication|Deduplication When multiple similar systems are backed up to the same destination storage device, there exists the potential for much redundancy within the backed up data. For example, if 20 Windows workstations were backed up to the same data repository, they might share a common set of system files. The data repository only needs to store one copy of those files to be able to restore any one of those workstations. This technique can be applied at the file level or even on raw blocks of data, potentially resulting in a massive reduction in required storage space. Deduplication can occur on a server before any data moves to backup media, sometimes referred to as source/client side deduplication. This approach also reduces bandwidth required to send backup data to its target media. The process can also occur at the target storage device, sometimes referred to as inline or back-end deduplication; Duplication : Sometimes backup jobs are duplicated to a second set of storage media. This can be done to rearrange the backup images to optimize restore speed, to have a second copy for archiving in a different location or on a different storage medium. Encryption High capacity removable storage media such as backup tapes present a data security risk if they are lost or stolen. [13] Encrypting the data on these media can mitigate this problem, but presents new problems. First, encryption is a CPU intensive process that can slow down backup speeds. Second, once data has been encrypted, it can not be effectively compressed (although since redundant data makes cryptanalytic attacks easier many encryption routines compress the data as an integral part of the encryption process). Third, the security of the encrypted backups is only as effective as the security of the key management policy. Staging Sometimes backup jobs are copied to a staging disk before being copied to tape. This can be useful if there is a problem matching the speed of the final destination device with the source system as is frequently faced in network-based backup systems. [edit] Managing the backup process It is important to understand that backup is a process. As long as new data is being created and changes are being made, backups will need to be updated. Individuals and organizations with anything from one computer to thousands (or even millions) of computer systems all have requirements for protecting data. While the scale is different, the objectives and limitations are essentially the same. Likewise, those who perform backups need to know to what extent they were successful, regardless of scale. [edit] Objectives Recovery Point Objective (RPO) The point in time that the restarted infrastructure will reflect. Essentially, this is the roll-back that will be experienced as a result of the recovery. The most desirable RPO would be the point just prior to the data loss event. Making a more recent recovery point achievable requires increasing the frequency of synchronization between the source data and the backup repository.[14] Recovery Time Objective (RTO) The amount of time elapsed between disaster and restoration of business functions.[15] Data security In addition to preserving access to data for its owners, data must be restricted from unauthorized access. Backups must be performed in a manner that does not compromise the original owner's undertaking. This can be achieved with data encryption and proper media handling policies. [edit] Limitations System impacts An effective backup scheme will take into consideration the limitations of the situation. All backup schemes have some impact on the system being backed up. If this impact is significant, the backup needs to be time-limited to a convenient backup window or alternate means of protecting data need to be employed. These alternate means tend to be more expensive. Costs of hardware, software, labor All types of storage media have a finite capacity with a real cost. Matching the correct amount of storage capacity (over time) with the backup needs is an important part of the design of a backup scheme. Any backup scheme has some labor requirement, but complicated schemes have considerably higher labor requirements. The cost of commercial backup software can also be considerable. Network Bandwidth Distributed backup systems can be impacted by limited network bandwidth. [edit] Implementation Meeting the defined objectives in the face of the above limitations can be a difficult task. The tools and concepts below can make that task more achievable. Scheduling Using a Job scheduler can greatly improve the reliability and consistency of backups by removing part of the human element. Many backup software packages include this functionality. Authentication Over the course of regular operations, the user accounts and/or system agents that perform the backups need to be authenticated at some level. The power to copy all data off of or onto a system requires unrestricted access. Using an authentication mechanism is a good way to prevent the backup scheme from being used for unauthorized activity. Chain of trust Removable storage media are physical items and must only be handled by trusted individuals. Establishing a chain of trusted individuals (and vendors) is critical to defining the security of the data. [edit] Measuring the process To ensure that the backup scheme is working as expected, the process needs to include monitoring key factors and maintaining historical data. Backup validation (also known as "Backup Success Validation") The process by which owners of data can get information regarding how their data was backed up. This same process is also used to prove compliance to regulatory bodies outside of the organization, for example, an insurance company might be required under HIPAA to show "proof" that their patient data are meeting records retention requirements[16]. Disaster, data complexity, data value and increasing dependence upon ever-growing volumes of data all contribute to the anxiety around and dependence upon successful backups to ensure business continuity. For that reason, many organizations rely on third-party or "independent" solutions to test, validate, and optimize their backup operations (backup reporting). Reporting In larger configurations, reports are useful for monitoring media usage, device status, errors, vault coordination and other information about the backup process. Logging In addition to the history of computer generated reports, activity and change logs are useful for monitoring backup system events. Validation Many backup programs make use of checksums or hashes to validate that the data was accurately copied. These offer several advantages. First, they allow data integrity to be verified without reference to the original file: if the file as stored on the backup medium has the same checksum as the saved value, then it is very probably correct. Second, some backup programs can use checksums to avoid making redundant copies of files, to improve backup speed. This is particularly useful for the de-duplication process. [edit] Lore Wikiquote has a collection of quotations related to: Backup [edit] Advice The more important the data that is stored on the computer the greater the need is for backing up this data. A backup is only as useful as its associated restore strategy. Storing the copy near the original is unwise, since many disasters such as fire, flood and electrical surges are likely to cause damage to the backup at the same time. Automated backup and scheduling should be considered, as manual backups can be affected by human error. [edit] Events The September 11, 2001 attacks on the World Trade Center presented many organizations with unprecedented disaster recovery scenarios, due to its scope. A few years earlier, during a fire at the headquarters of Credit Lyonnais, a major bank in Paris, system administrators ran into the burning building to rescue backup tapes because they didn't have offsite copies. Privacy Rights Clearinghouse has documented:[17] 9 instances of stolen or lost backup tapes (among major organizations) in 2005. Affected organizations included Bank of America, Ameritrade, Citigroup, and Time Warner. 7 instances of stolen or lost backup tapes (among major organizations) in 2006. [edit] Glossary of backup terms Backup policy An organisation's procedures and rules for ensuring that adequate amounts and types of backups are made, including suitably frequent testing of the process for restoring the original production system from the backup copies. Backup rotation scheme A method for effectively backing up data where multiple media are systematically moved from storage to usage in the backup process and back to storage. There are several different schemes. Each takes a different approach to balance the need for a long retention period with frequently backing up changes. Some schemes are more complicated than others. Backup site A place where business can continue after a data loss event. Such a site may have ready access to the backups or possibly even a continuously updated mirror. Backup software Computer software applications that are used for performing the backing up of data, i.e., the systematic generation of backup copies. Backup window The period of time that a system is available to perform a backup procedure. Backup procedures can have detrimental effects to system and network performance, sometimes requiring the primary use of the system to be suspended. These effects can be mitigated by arranging a backup window with the users or owners of the system(s). Copy backup Term for full backup used by Windows Server 2003. Cumulative incremental backup Term for a differential backup used by NetBackup. Daily backup Term for incremental backup used by Windows Server 2003. Data salvage The process of recovering data from storage devices when the normal operational methods are impossible. This process is typically performed by specialists in controlled environments with special tools. For example, a crashed hard disk may still have data on it even though it doesn't work properly. A data salvage specialist might be able to recover much of the original data by opening it up in a clean room and tinkering with the internal parts. Differential backup A cumulative backup of all changes made since the last full backup. The advantage to this is the quicker recovery time, requiring only a full backup and the latest differential backup to restore the system. The disadvantage is that for each day elapsed since the last full backup, more data needs to be backed up, especially if a majority of the data has been changed. Differential incremental backup Term for an incremental backup used by NetBackup. Disaster recovery The process of recovering after a business disaster and restoring or recreating data. One of the main purposes of creating backups is to facilitate a successful disaster recovery. For maximum effectiveness, this process should be planned in advance and audited. Disk image A method of backing up a whole disk or filesystem in a single image. Since the underlying data structures are what is actually backed up, this method does not allow for file level control over what is selected for backup or restore. FlashBackup Term for raw partition backup used by NetBackup Advanced Client. In NBAC, support is limited to the VxFS (Veritas), ufs (Solaris), Online JFS (HP-UX), and NTFS (Windows) filesystem types. Similar to the UNIX utility dump. Full backup A backup of all (selected) files on the system. In contrast to a drive image, this does not included the file allocation tables, partition structure and boot sectors. Hot backup A backup of a database that is still running, and so changes may be made to the data while it is being backed up. Some database engines keep a record of all entries changed, including the complete new value. This can be used to resolve changes made during the backup. Incremental backup A backup that only contains the files that have changed since the most recent backup (either full or incremental). The advantage of this is quicker backup times, as only changed files need to be saved. The disadvantage is longer recovery times, as the latest full backup, and all incremental backups up to the date of data loss need to be restored. Media spanning Sometimes a backup job is larger than a single destination storage medium. In this case, the job must be broken up into fragments that can be distributed across multiple storage media. Multiplexing The practice of combining multiple backup data streams into a single stream that can be written to a single storage device. For example, backing up 4 PC's to a single tape drive at once. Multistreaming The practice of creating multiple backup data streams from a single system to multiple storage devices. For example, backing up a single database to 4 tape drives at once. Normal backup Term for full backup used by Windows Server 2003. Near store Provisionally backing up data to a local staging backup device, possibly for later archival backup to a remote store device. Open file backup Term for the ability to backup a file while it is in use by another application. See File locking. Remote store Backing up data to an offsite permanent backup facility, either directly from the live data source or else from an intermediate near store device. Restore time The amount of time required to bring a desired data set back from the backup media. Retention time The amount of time in which a given set of data will remain available for restore. Some backup products rely on daily copies of data and measure retention in terms of days. Others retain a number of copies of data changes regardless of the amount of time. Synthetic backup Term used by NetBackup for a restorable backup image that is synthesized on the backup server from a previous full backup and all the incremental backups since then. It is equivalent to what a full backup would be if it were taken at the time of the last incremental backup. Tape library A storage device which contains tape drives, slots to hold tape cartridges, a barcode reader to identify tape cartridges and an automated method for physically moving tapes within the device. These devices can store immense amounts of data. True image restore Term used by NetBackup for the collection of file deletion and file movement records so that an accurate restore can be performed. For instance, consider a system that has a directory with 5 documents in it on Friday. On Saturday, the system gets a full backup that includes those 5 documents. On Monday, the owner of those documents deletes 2 of them and updates 1 of the 3 remaining. That updated document gets backed up as part of The Monday night incremental backup. On Tuesday afternoon the system crashes. If we perform a normal restore of the full backup from Saturday and the incremental backup from Monday to the fresh system, we will have restored the 2 documents that were intentionally deleted. True image restore keeps track of the deletions with each incremental backup and prevents the deleted files from being inappropriately restored. Virtual Tape Library (VTL) A storage device that appears to be a tape library to backup software, but actually stores data by some other means. A VTL can be configured as a temporary storage location before data is actually sent to real tapes or it can be the final storage location itself. [edit] See also Backup software List of backup software Remote backup service, sometimes called Managed backup service. Disaster recovery and business continuity auditing Digital preservation [edit] References ^ Why do I need to Backup my Files?. Retrieved on 2007-03-10 ^ Backup – Your last line of defense. Retrieved on 2007-03-10 ^ Incremental Backup. Retrieved on 2007-03-10 ^ Differential Backup. Retrieved on 2007-03-10 ^ Continuos Protection white paper. (2005-10-01). Retrieved on 2007-03-10 ^ Disk to Disk Backup versus Tape - War or Truce? (2004-12-09). Retrieved on 2007-03-10 ^ Bye Bye Tape, Hello 5.3TB eSATA. Retrieved on 2007-04-22. ^ Choosing a Data Backup. Retrieved on 2007-03-10 ^ Wayback: A User-level Versioning File System for Linux (2004). Retrieved on 2007-03-10 ^ What is a Snapshot backup?. Retrieved on 2007-03-10 ^ Oracle Tips (1997-12-10). Retrieved on 2007-03-10 ^ Oracle Tips (1997-12-10). Retrieved on 2007-03-10 ^ Backups tapes a backdoor for identity thieves (2004-04-28). Retrieved on 2007-03-10 ^ Recovery Point Objective Definition. Retrieved on 2007-03-10 ^ Recovery Time Objective Definition. Retrieved on 2007-03-07 ^ HIPAA Advisory. Retrieved on 2007-03-10 ^ A Chronology of Data Breaches Privacy Rights Clearinghouse, San Diego Retrieved from "http://en.wikipedia.org/wiki/Backup" Categories: Computer storage | Data security |
| |||||||||||||||||||||||||||||
